Craftsman 315.115033 - Manual (Page 13)

CRAFTSMAN SANDER/POLISHER - MODEL NUMBER 315.115033
The model number will be found on a plate attached to the motor housing. Always mention the
model number in all correspondence regarding your
CRAFTSMAN SANDER/POLISHER
or when
ordering repair parts.
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
PARTS LIST
Key
No.
Part
Number
Description Quan.
1 900593001 Polishing Bonnet.........................................1
2 680983001 Spanner Nut................................................1
3
***
Sanding Diso
4 300588002 Rubber Diso................................................1
5 940055125 Data Plate............................ .......................1
6 940298042 Logo Plate...................................................1
7 300583001 Auxiliary Handle................... .......................1
8 630886001 Spanner Wrenoh.........................................1
9 630887001 Pin...............................................................1
987000030 Operator's Manual...............
NOTE: “A” — The assembly shown represents an important part of the Double Insulated System.
To avoid the possibility of alteration or damage to the System, service should be performed by your
nearest Sears Repair Center. Contact your nearest Sears Catalog Order or Retail Store for service
center information.
Sanding discs in assorted grits for sanding both wood and metal may be obtained from your
nearest Sears Retail Store.
x_
13