Craftsman 71.74292 - Manual (Page 5)

Figure 3
To detach a tool:
1. Grasp the tool attachment firmly
with one hand (note, do not grasp on
a rotating part such as the auxiliary
handle), and twist the lock ring on the
power handle to the unlocked position
with the other hand, (see figure 4)
Figure 4
2. Pull the power handle and tool
attachment apart. The power handle
and tool attachment should separate
easily. If they do not, check to be
sure that the lock ring is in the fully
unlocked position.
Attaching the Battery
1. Align the rib on the battery pack with
the corresponding slot in the end of the
power handle, (see figure 5)
Figure 5
2. Insert the battery fully into the
handle making sure that the spring-
loaded buttons on each side of the
battery pack snap into place in the
handle.
Removing the Battery
1. Depress the spring-loaded
buttons on both sides of the battery
simultaneously, (see figure 6)
2. Pull the battery pack straight out
from the handle.
To turn the tooi on:
1. Grip the control grip firmly with one
hand and grip the auxiliary handle on
the tool attachment (if provided) with
the other hand.
2. Push the trigger that your thumb
rests on straight forward, this is the
safety release, (see figure 7)