Photos, Basic recording, Taking photos – Canon HG20 User Manual

Page 59

Advertising
background image

59

Photos

Refer to this chapter for details on shooting photos – taking photos and
playing them back, capturing photos from video and printing photos.

Taking Photos

1

Set the mode dial to

.

2

Turn on the camcorder.

By default, photos are recorded on
the hard disk. You can also set the
memory card as the recording media
for photos (

31).

3

Press

halfway.

• Once the focus is automatically

adjusted,

will turn green and

one or more AF frames will appear.

• When you press

on the

wireless controller, the photo is

recorded after the autofocus is
activated and locked.

4

Press

fully.

The ACCESS indicator will flash as
the photo is being recorded.

IMPORTANT

Observe the following precautions while
the

ACCESS

indicator is on or flashing.

Failing to do so may result in permanent
data loss.
- Do not subject the camcorder to

vibrations or strong impacts.

- Do not open the memory card slot cover.
- Do not disconnect the power source or

turn off the camcorder.

- Do not change the position of the mode

dial.

NOTES

• If the subject is not suitable for

autofocus,

turns yellow. Adjust the

focus manually (

47).

• When the subject is too bright,

[Overexp.] starts flashing. In such case,
use the optional FS-H37U ND filter.

Basic Recording

PHOTO

PHOTO

PHOTO

Advertising
This manual is related to the following products: