Craftsman 875.199810 - Manual (Page 5)

Owner’s Manual Model No. 875.199810
Some materials such as adhesives and
tar. Contain ctrertitcais whose vapors
could cause serious injury with
prolonged exposure. Always work in a
clean, dry, well ventilated area.
A
warning
Tools which contain moving elements,
or drive other moving toots, sucfi as
grinding wheels, sockets, sanding
discs, etc., can become entangled in
hair, cloUiing, Jewelry and other loose
objects, resulting in severe injury.
Never wear loose fitting apparel which
contains loose straps or ties, that could
become tangled in moving parts of the
tool. Remove any jewelry, watches, etc.,
which might become caught by the
tool. Keep hands away from moving
parts. Tie up or cover long hair.
A
warning
Improperly maintained tools and
accessories can cause serious injury.
Maintain die tool with care. A properly
maintaiaed iooi, with sharp cutting
edges, reduces the risk of binding and
is easier to control
A WARNING
Toots which cut, shear, drill, staple,
punch, cftis«/, etc. are capable of
causing serious injury. Keep the
working part of the tool away from
hands and body.
A
warning
After an air tool has been lubricated, oil
will discharge through the exhaust port
during the first few seconds of
operation. Thus, the exhaust port must
be covered with a towel before applying
air pressure.
A
warning
Only use sockets designated “FOR USE
mm IMPACT WRENCHES.“ Hand tool
sockets can break, creating a hazard
from dying pieces. Always check
sockets, retainers and drives regulariy
for wear or damage and replace when
necessary.
There is a risk of bursting if the tool is
damaged. Check for misalignment or
binding of moving parts, breakage of
parts and any other condition that
affects the tool’s operation, if damaged,
have the tool serviced before using.
ENG-5