Carton contents, Assembly, Acaution – Craftsman 919.679501 User Manual
Page 16: Tools needed for assembly, Remove generator from carton
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARTON CONTENTS
ASSEMBLY
2 - Shoulder
Bolts
1 - Owner's Manual
1 - Foot Bracket
1 - Isolator Foot
6-5/16-18x3.4 "
Cap Screws
9 - 5/16-18
Lock Nuts
2 - Handle Caps
' 5.16-18 X 1 3/4 '
Cap Screws
2 - Washers
2 - 3/8-16
Lock Nuts
ACAUTION
Read owner's manual. Do not attempt to operate equipment until you have read Owner’s
Manual for Safety, Assembly, Operation, Maintenance, Storage Instructions.
TOOLS NEEDED FOR ASSEMBLY
1
- Box Cutter or Knife
2-9/16 " Wrenches
2 - 1/2" Wrenches
1 -1" thick X 1 ’ square piece of wood
REMOVE GENERATOR FROM CARTON
•
Open carton from top,
•
Cut carton along dotted lines.
•
Remove all carton inserts.
•
Remove generator through opening in carton.
•
Using a 9/16 inch socket remove shipping block
from under the generator head. Unscrew the bolt
and remove the wood block. NOTE: It is very
important that this is removed before starting your
generator.
IMPORTANT: Before any attempt to start your genera
tor be sure to check engine oil (See Adding Engine Oil
paragraph in the Operation section on page 13 of this
manual.)
9 —ENG
MGP-S79S01