Accessories and attachments, Tools needed for assembly – Craftsman 137.218030 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCESSORIES AND ATTACHMENTS
CARTON CONTENTS
RECOMMENDED ACCESSORIES
A WARNING
Visit your Sears Hardware Department or see the
Craftsman Power and Hand Tools Catalog to purchase
recommended accessories for this power tool.
A
WARNING
To avoid the risk of personal injury:
• Do not use adjustable (wobble) type dadoes or
carbide tipped dado blades.
• Only use stackable dadoes.
• Maximum dado width is 1/2”.
• Do not use a dado with a diameter larger than 6”.
• Do not use molding head set with this saw.
• Do not modify this power tool or use accessories
not recommended by Sears.
TOOLS NEEDED FOR ASSEMBLY
SUPPLIED
NOT SUPPLIED
Blade wrench
Medium screwdriver
c
Blade wrench
#2 Phillips screwdriver
I
I I I I I I I I I I I
Straight edge
3 mm Hex Key
4 mm Hex Key
Adjustable wrench
UNPACKING AND CHECKING CONTENTS
Separate all parts from packing materials. Check each
part with the Illustration on the next page and the “Table
of Loose Parts” to make certain all items are accounted
for, before discarding any packing material.
A
WARNING
If any part is missing or damaged, do not attempt
to assemble the table saw, plug in the power cord,
or turn the switch ON until the missing or damaged
part is obtained and is installed correctly. To avoid
electric shock, use only identical replacement
parts when servicing double insulated tools. Call
1-800-4-MY-HOME® for replacement parts.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION
QUAN
A
Table saw assembly
1
B
Blade guard and splitter ass’y
1
C
Bolt, fiat washer, toothed washer,
oval washer, spring washer
1
D
Rip fence, handle & nut
1
E
Handwheel
2
F
Dome nut
2
G
Miter gauge
1
H
Hex key
2
!
Blade wrench
2
J
Left table extension fence
1
K
Right table extension fence
1
L
Locking knob
4
M
Blade
1
1 each
STAND
O
Short upper support
2
P
Long upper support
2
Q
Short bottom support
2
R
Long bottom support
2
S
Leg
4
T
Stand mounting hardware bag
1
NOTE: To make assembly easier, keep contents of box
together. Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean dry cloth. This will
reduce friction when pushing the workpeice. To avoid
injury, the styrofoam block should be removed between
the motor and the table.