Maintenance – Craftsman 973.110470 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANCE
WARNING: When servicing, use only
identical Craftsman replacement parts. Use of
any other part may create a hazard or cause
product damage.
WARNING:
Do not at any time let brake fluids,
> gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicais that can damage, weaken or
destroy plastic.
Do not
abuse power tools. Abusive practices can
damage tool as well as workpiece.
A WARNING:
Do not attempt to modify this
worklight or create accessories not recommended
for use with this worklight. Any such alteration or
modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
BULB REPLACEMENT
See Figure 4.
When purchasing replacement bulb, request recom
mended part number 7811502.
See Figure 4.
TO REPLACE BULB:
■ Remove battery pack from worklight.
See Page 5.
■ Depress button located on top of len cover then
pull lens cover to remove.
■ Remove old bulb from spring by twisting bulb in a
clockwise direction.
LENS COVER
PULL LENS
COVER FORWARD
TO REMOVE
DEPRESS
BUnON
■ Insert new bulb in spring by twisting bulb in a
clockwise direction.
■ Replace lens cover aligning tabs inside lens cover
with slots on housing then snap into place.
■ Replace battery pack.
Note: For your convenience, your worklight has a bulb
storage area to store an extra bulb.
See Figure 4.
BULB
STORAGE AREA
FOR MODEL NO. 973.110470
REQUEST BULB PART NO. 7811502
Fig. 4