Craftsman 320.17217 - Manual (Page 3)

SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols and the explanations with them deserve your careful
attention and understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they give are no substitutes
for proper accident prevention measures.
A
WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety alert symbols, such as “DANGER, ” “WARNING,”
and “CAUTION,” before using this keyless drill. Failure to following all
instructions listed below may result in electric shock, fire and/or serious personal
injury.
SYMBOL MBANNING
A
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
A
DANGER: Failure to obey this safety warning will result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the
risk of fire, electric shock, and personal injury.
A
WARNING: Failure to obey this safety warning can result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the
risk of fire, electric shock, and personal injury.
A
CAUTION: Failure to obey this safety warning may result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the
risk of fire, electric, shock and personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform user of important information and/or instructions that could lead to
equipment or other property damage if not followed. Each message is preceded
by the word “NOTE” as in the example below.
NOTE: Equipment and/or property damage may result if these instructions are
not followed.
The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety glasses
with side shields and a full-face shield when needed.
We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields,
available at Sears Stores or other Craftsman outlets.
Always use eye protection that is marked to comply with
ANSI Z87.1
17217 ManuaLRevised_09-0708 Page 3