Polishing accessories, Aluminum oxide abrasive wheels, Sanding accessories – Craftsman 572.61095 User Manual

Page 24: Wire brushes, Bristle brushes, Cutting wheels, High speed router bits

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

EZZZX3C:)

Silicon Carbide Grinding Stones
Tougher than aluminum oxide points, these
are made especially for use on hard materials

such as glass and ceramics. Typical uses
might be the removal of stilt marks and
excess glaze on ceramics and engraving on

glass.

Polishing Accessories

These include an impregnated polishing point

and an impregnated polishing wheel for
bringing metal surfaces to smooth finish; a felt

polishing tip and felt polishing wheel, and
cloth polishing wheel, all used for polishing
plastics, metals, jewelry and small parts.

Polishing points make a very smooth surface,
but a high luster is obtained using felt or cloth
wheels and polishing compound.

For best results polishing accessories
should be used at speeds not greater than
15,000 RPM. Refer to Operating Speeds
section for proper tool speed setting.

Aluminum Oxide Abrasive Wheels

Use to remove paint, deburr metai, polish
stainless steel and other metals. Available in
fine and medium grits.

Sanding Accessories
Sanding discs are made to fit mandrel No.

25028. They can be used for nearly any small
sanding job you might have, from model

making to fine furniturd finishing. In addition,
there is the drum sender, a tiny drum which fits
into the Rotary Tool and makes it possible to
shape wood, smooth fiberglass, sand inside

curves and other difficult places, and other
sanding jobs. You replace the sanding bands
on the drum as they become worn and lose
their grit. Bands corne in fine and coarse

grades.

Wire Brushes
Three different shapes of wire brushes are

available. Never use wire brushes at
speeds greater than 15,000 RPM. Refer to
Operating Speeds section for proper tool
speed setting.
They remove rust from tools and other metal

surfaces, and clean and burnish metal parts.
Use for such jobs as cleaning electrical
connections to assure good conduction.

Bristle Brushes

This is an excellent cleaning tool on

silverware, jewelry and antiques. A bristle

brush can be used with polishing compound

for faster cleaning or polishing.

Cutting Wheels

These thin discs of emery or fiberglass are

used for slicing, cutting off and similar
operations. Use them for cutting off frozen
bolt heads and nuts, or to reslot a screw head
which has become so damaged that the
screwdriver won’t work in it. Fine for cutting

BX cable, small rods, tubing, cable and
cutting rectangular holes in sheet metal.

U

High Speed Router Bits
For routing, inlaying, and mortising in wood
and other soft materials. Use with Craftsman

No. 53099 Router attachment and No. 53034
Shaper/Router table.

24

Advertising
This manual is related to the following products: