Craftsman 580.752000 - Manual (Page 11)

MAINTENANCE
OWNER’S RESPONSIBILITIES
Follow the hourly or calendar Intervals, whichever occurs first.
More frequent service Is required when operating in adverse conditions noted below.
Clean if clogged. Replace if perforated or torn.
Change oil after the first (5) operating hours and evety 50 hours or yearly thereafter.
Change sooner when operating under dirty or dusty conditions.
Replace more often under dirty or dusty conditions.
PRODUCT SPECIFICATIONS
Pressure Washer Specifications
Pressure................................................. 2,000 PSI
Flow Rate............................................... 2.0 GPM
Chemical Mix.......................................... Use as directed
Water Supply Temperature.....................Not to exceed lOO’F
Shipping Weight..................................... 48 lbs.
Engine Specifications
Rated Horsepower................................. 3.75 HP
Spark Plug Type:
Resistor ........................................... Champion RJ-1SLM
Set Gap To:..................................... 0.030 inches (0.78mm)
Fuel Capacity..........................................1.0 Quarts
Oil
Above 40T ....................................... SAE 30
0^-40^ ..............................................SAE 5W-30 or 1GW-3G
GENERAL RECOMMENDATIONS
The pressure washer warranty does not cover items
that have been subjected to operator abuse or
negligence. To receive full value from the warranty,
the operator must maintain pressure washer as
instructed in this manuai including proper storage as
detaiied in “Storage“ on page 15.
Some adjustments wiii need to be made periodicaily to
property maintain your pressure washer.
All service and adjustments should be made at least
once each season. Follow the requirements in the
“Maintenance Schedule” chart above.
NOTE: Once a year you should clean or replace the
spark plug and replace the air filter. A new spark plug
and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer.
If equipped with Infiatable tires, keep the air pressure
at the value marked on the tire or within 15 and 40 psi.
BEFORE EACH USE
1. Check engine oil level.
2. Check water inlet screen for damage.
3. Check in-line filter for debris.
4. Check high pressure hose for leaks.
5. Check chemical filters for damage.
6. Check gun and nozzle extension assembly for
leaks.
7. Purge pump of air and contaminants.
PRESSURE WASHER
MAINTENANCE
Check and Clean Inlet Screen
Examine garden hose Inlet screen. Clean If It Is
clogged or replace if it is torn.
11