Craftsman 139.53664SRT2 - Manual (Page 38)

Accessories
Sears offers many useful accessories for your garage door opener. They are illustrated below with
Sears model numbers and descriptions.
139.53702 Emergency Key Release:
Required\ox a garage with NO
access door. Enables homeowner
to open garage door manually from
outside by disengaging trolley. -
139.53703 Outdoor Key Switch;
Operates the garage door
automatically from outside when
remote control is not handy. ■
139.53804 8 Foot Rail Extension
To allow an 8 foot door to open fully.
139.53805 10 Foot Rail Extension:
To allow a 10 foot door to open fully.
53589 Support Brackets;
For finished ceilings or where
additional support is required,
based on garage construction.
Includes brackets and fastening
hardware.
139.53681
139.53680
139.53684
SECURITY+ 3-Function Remote
Control:
Includes visor clip.
SECUR1TY+ Compact
3-Function Remote Control:
With loop for attaching key ring.
SECURITY* Keyless Entry:
Enables homeowner to operate garage
door opener from outside by entering a
password. Also can add a temporary
password for visitors or service
persons. This temporary password can
be limited to a programmable number
of hours or entries.
139.53686
©
Plug-In Light Control:
Enables homeowner to turn on a
lamp, television or other appliance
from car, bedside, or anywhere in
the home with a remote.
139.53709 Door Clearance Brackets:
[For Sectional Doors Ont^
Replaces top brackets and rollers on
door to reduce height of door travel.
For use when installing opener in
garage with low headroom clearance.
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting iocation before installation.
If you have a Premium Control Console:
1. With the door dosed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
If you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers from
0 to 9 (a number can be used more than once, for
example, 4. 0, 4,1).
2. Press the four buttons for the password, then
press and ho!d\he Enter button. The indicator light
on the door opener panel will blink.
3. Press and release the SRT (learn) button on the
opener panel. After the opener light flashes,
release the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
38