Craftsman 580.762010 - Manual (Page 6)

OPERATION
Read this owner’s manual and safety rules before operating your high pressure washer. Compare the
illustrations with your high pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
KNOW YOUR HIGH PRESSURE WASHER
Ignition Switch Lever — Sets engine in starting mode
for recoil starter and STOPS running engine.
Choke Rod — Adjusts for cold or warm engine startup.
Recoil Starter Grip — For starting engine manually.
Air Cleaner — Dry type filter element limits the amount
of dirt and dust that gets into the engine.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Chemical Injection Tube and Filter — Mixes water and
detergent in outlet water flow.
High Pressure Outlet — Connection for high pressure
hose.
Water Inlet — Connection for garden hose.
Adjustable Pressure Regulator — Adjusts water
pressure.
Pump — Develops high water pressure.
Turbo Nozzle — Attaches to nozzle extension. Creates a
high pressure stream that rotates in a circular pattern.
Adjustable Nozzle — Attaches to nozzle extension and
adjusts to low or high pressure. Twisting nozzle adjusts
the narrow spray pattern to a fan spray pattern.
Note: You can only siphon detergent in the low pressure
mode.
Nozzle Extension (wand) — Attach one end to the
spray gun. Attach the other end to either the adjustable
nozzle or turbo nozzle.
High Pressure Hose — Attach one end to the pump.
Attach the other end to the spray gun.
Oil Fill Cap — Fill engine with SAE 10W'30 oil here.
Gas Cap — Fill gas tank with unleaded gasoline here.