Craftsman 137.219100 - Manual (Page 6)

ACCESSORIES AND ATTACHMENTS
CARTON CONTENTS
A¥AILABLE ACCESSORIES
'VARrilNG
Use oniy accessories recommended for this drill press.
Follow instructions that accompany accessories. Use of
improper accessories may cause hazards.
Visit your Sears Hardware Department or see the Searg
Power and Hand Tool Catalogue for the following
accessories:
® Drill bits
® Hold-Down and Guide
® Drill Press Vises
® Clamping Kit
Use oniy accessories designed for this drill press to
avoid injury from thrown broken parts or workpieces-
Sears may recoin mend other accessories not listed in
this manual. See your nearest Sears store or Power and
Hand Tool Catalogue for other accessories.
Do not use any accessory unless you have completely
read the instruction or owner’s manual for that accessory.
UNPACKING AND CHECKING
CONTENTS
A WARNING
If any part is missing or damaged, do not plug the drill
press in until the missing or damaged part is replaced,
and assembly is complete.
Carefully unpack the drill press and all its parts, and
compare against the illustration below.
To protect the drill press from moisture, a protective
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moistened with
kerosene or WD-40.
A WARNING
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, iacquer thinner or similar highly
volatile solvents to clean the drill press.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION GUAM'
A. Head assembly 1
B. Base 1
C. Table 1
D. Column assembly 1
E. Collar 1
F. Rack 1
Loose parts bag:
G. Feed handles 3
H. Worm gear 1
1. Crank handle 1
J. Lock handle 1
K. Hex bolts 4
L. Fence assembly 1
M. Triangle knobs 2
N. Wing nuts 2
0. Washers 4
P. Hex keys 2
Box:
Q. Chuck key 1
R. Chuck 1