Craftsman 315.115210 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

WARNING: When servicing, use oniy identical

Craftsman

replacement parts.

Use of any other part

may create a hazard or cause product damage.

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.

A WARNING:

Do not at any time let brake fluids,

gasoline, petroleum-based products,

penetrating

oils,

etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken or destroy
plastic.

Do not abuse power tools. Abusive practices can damage
tool as well as workpiece.

Only the parts shown on parts list, page 18 and 19, are
intended to be repaired or replaced by the customer. All
other parts should be repfaced at a Sears Service Center.

WARNING: Do not

attempt

to modify this tool

or

create

accessories not recommended for use

with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.

BATTERIES

Your drill's battery pack is equipped with nickel-cadmium

rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide

maximum trouble free life. However, like all batteries, they

will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these

batteries, especially when wearing rings and jewelry, could
result in a serious burn.

To obtain the longest possible battery life, we suggest the
following:

Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery life.

Never store batteries in a discharged condition.
Recharge them immediately after they are discharged.

A!! batteries gradually lose their charge. The higher the

temperature the quicker they lose their charge, if you
store your tool for long periods of time without using
it, recharge the batteries every month or two. This
practice will prolong battery life.

To preserve natural resources, please

recycle or dispose of batteries properly.

This product contains nickel-cadmium

batteries. Local, state or federal laws

may prohibit disposal of nickel-cadmium

..... . batteries in ordinary trash.

Consult your local waste authority for information

regarding available recycling and/or disposal options.

BATTERY PACK REMOVAL AND PREPARATION
FOR

recycling

WARNING: Upon

removal, cover the battery pack's

terminals with

heavy duty

adhesive

tape. Do not

attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.

Also, never touch both terminals with metal objects

and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.

The following recommended accessories are currently available at Sears Retail Stores.

■ 0-Pc. Extra Length Magnite Power Bit Set

■ 17-Pc. Power Screwdriver/Nutdriver Set and Case

30-Pc. Power Screwdriver/Nutdriver Set and Case

High Speed Bits (For Wood or Metal)..3/4 in. Max.

WARNING:

The use of attachments or accessories not listed might be hazardous.

16

Advertising
This manual is related to the following products: