Craftsman 315.115210 - Manual (Page 8)

product spe CIF í CATIONS
DRILL-DRIVER
Chuck
Motor
Gear Train
Switch
No Load Speed
Battery
Maximum Torque
Charger
Rating
Charge Rate
Clutch 315.115200
3/8 in. Keyless
13.2 Volts
One Speed
Variable Speed
0'600/min
130139018
100 in.lb.
140287001
120 V, 80 Hz,AC only
3-6 Hour
24 Positions
315.115210
3/8 in. Keyless
15.6 Volts
One Speed
Variable Speed
0-800/min
130139015
110 in.lb.
140250013
120 V 60 Hz,AConiy
3-6 Hour
24 Positions
KNOW THIS TOOL
See Figure 1.
Before attempting to use this tool, familiarize
yourself with all operating features and safety
requirements.
KEYLESS CHUCK
This tool has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
SVtfiTCH
To turn this tool ON, depress the switch trigger. Release
switch trigger to turn your drill-driver OFF.
SWITCH LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
DIRECTION OF ROTATION SELECTOR
{FORWARD/REVERSE)
This too! has a forward/reverse selector located above the
switch trigger.
WRIST STRAP
A wrist strap is provided to reduce the chances of drop­
ping your tool. Place one hand through the wrist strap
when carrying tool.
BIT STORAGE
When not in use, bit(s) provided with this tool can be
placed in the storage area located on the top of the motor
housing.
WARNING: if any parts are missing, do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.