Craftsman 358.792440 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Never start or run the engine inside a

closed room or building. Breathing
exhaust fumes can kill.

• Keep handles free of oil and fuel.
• Always use the handlebar and a

properly adjusted shoulder strap

when using brushcutter attachment

(see

ASSEMBLY).

UNIT/MAINTENANCE SAFETY

^WARNING: Disconnect power-

head spark piug (or disconnect power-
head from power source) before per­

forming maintenance.

• Look for and replace damaged or

loose parts before each use. Look

for and repair fuel leaks before use.

Keep unit in good working condition.

• Throw away blades that are bent,

warped, cracked, broken, or dam­

aged in any other way. Replace trim­
mer head parts that are cracked,
chipped, broken, or damaged in any

other way before using the unit.

• Maintain the unit according to recom­

mended procedures. Keep the blade
sharp. Never use flailing devices,

wire, rope, string, etc.

• Use oniy specified blade or trimmer

head; make sure it is properly in­
stalled and securely fastened.

• Never start engine with clutch shroud

removed. The clutch can fly off and
cause serious injury.

• Be sure blade or trimmer head stops

turning when engine idles.

• Make carburetor adjustments with the

lower end supported to prevent the
blade or trimmer iine from contacting
any object. Hold the unit by hand; do
not use the shoulder strap for support.

• Keep others away when making car­

buretor adjustments.

• Use only recommended Craftsman

accessories and replacement parts.

• Have all maintenance and service

not explained in this manual per­

formed by a Sears Service Center.

FUEL SAFETY
• Mix and pour fuel outdoors.
• Keep away from sparks or flames.
• Use a container approved for fuel.
• Do not smoke or allow smoking near

fuel or the unit or while using the unit.

• Avoid spilling fuel or oil. Wipe up all

fuel spills before starting engine.

• Move at least 10 feet (3 meters) away

from fueling site before starting engine.

• Stop engine and allow it to cooi be­

fore removing fuel cap.

• Remove fuel cap slowly.
CUTTING SAFETY

WARNING:

Inspect the area to be

cut before each use. Remove objects
(rocks, broken glass, nails, wire, string,
etc.) which can be thrown or become
entangied in the blade or trimmer line.
• Keep others including children, ani­

mals, bystanders, and helpers at
least 50 feet (15 meters) away. Stop

the engine immediately if you are ap­

proached.

• Always keep engine on the right-

hand side of your body.

• Hold the unit firmly with both hands.
• Keep firm footing and balance. Do

not overreach.

• Keep blade/trimmer head below

waist level.

• Do not raise powerhead engine above

your waist.

• Keep all parts of your body away

from spinning blade/line and muffler.

• Cut from your left to your right. Cut­

ting on right side of shield will throw

debris away from the operator.

• Use only in daylight or good artificial

light.

• Use only for jobs explained in this

manual.

TRANSPORTING AND STORAGE

• Stop the powerhead engine before

carrying unit.

• Keep muffler away from your body.
• Allow engine to cool and secure unit

before storing or transporting it in a
vehicle.

• Empty the fuel tank before storing or

transporting the unit. Use up fuel left

in the carburetor by starting the en­

gine and letting it run until it stops.

• Store unit and fuel in an area where

fuel vapors cannot reach sparks or
open flames from water heaters,

electric motors or switches, furnaces,
etc.

• Store unit so the blade or line limiter

blade on shield cannot accidentally
cause injury.

• Store unit indoors, out of reach of

children.

Advertising