Samsung VR5160 - Manual (Page 13)

VCR Setup
Setting
The VCR has an internal clock which is used to turn the VCR on and off for timer recording.
Automatically Setting the Clock
When the AUTO CLOCK SET feature is selected, the VCR automatically updates its internal clock using
Coordinated Universal Time information transmitted by some broadcast stations. If the VCR is connected to a
cable box or DSS® box, cable box or DSS® box setup must be completed first (see page 6) and it’s activated when
the cable box is tuned to the PBS channel.
1
Press MENU on the remote control. Press V and ► to
select “CLOCK SET/ADJUST.”
Press ► to select AUTO.
Timer recording
► Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
[MENU/EXIT]
CLOCK SET/ADJUST
AUTO
MANUAL
Select [ ta ] and press [►]
Clock Data CH : If you select AUTO, the VCR will
automatically tune to a channel providing time data.
This may take the VCR up to 20 minutes. You can also
tune the VCR manually to a channel that you know
carries time information (PBS channel) with the ◄ ►
buttons.
Time ZONE : If you select AUTO for your time zone,
the VCR sets the dock using the first Coordinated
Universal Time information it finds. If the time is not
correct, select another time zone.
[▼*/►] [MENU/EXIT]
CLOCK SET/ADJUST
► Clock data CH:
Time zone :
Do you observe
DST in summer?
[AUTQ
[AUTO]
[AUTO]
[MENU/EXIT]
_____________ ^
Daylight Savings Time ; If you select AUTO, the VCR
sets the clock using the DST information broadcast in
the signal (channel). If you select YES, Daylight
Savings Time is observed:
Spring : The clock changes forward one hour on the first Sunday in April.
Autumn : The clock changes back one hour on the last Sunday in October.
Press MENU when you finish setting the clock.
If you selected AUTO CLOCK, the VCR clock will be
set automatically when the VCR is turned OFF.
If AUTO CLOCK SET is unsuccessful, check local station listings for channels with Coordinated Universal Time.
Tune the VCR to one of these channels, and turn the VCR off. If the time does not set within 20 minutes, set the
time and date manually.