Samsung VR5160 - Manual (Page 24)

VCR Operation
The Timer feature allows you to set the VCR to automatically record up to eight different programs.
Setting a timer recording
Your VCR can record on a specific day, or every day, Monday through Friday. Daily and weekly programs remain
in the timer until erased. A single program is erased after the program records.
1
To display a timer recording list, press MENU and ►
on the remote control.
Press ► and AT to set the channel.
Press ► to move to the next setting.
Repeat step 2 to set start time, end time, date and
record speed. Date can be set for one time, daily or
weekly recording. See below.
► Timer recording
Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
[MENU/EXIT]
Press the MENU button to complete programming
the timer recording. Stop the VCR or turn the power
off. The timer indicator comes on the VCR. The VCR
will automatically turn on and begin recording at the
time you have set. To stop a timer recording, press
the VCR power button.
Note: When using a cable decoder box or DSS®,
make sure the decoder box is on and set to the
correct channel for timer recording.
[MENU/CLEAR]
Auto Speed Select
If you are not sure the tape is long enough for timer program recording in the SP tape speed, set the
recording tape speed to “AUTO”. Recording starts in the SP tape speed. If the tape length is not long
enough, the tape speed automatically changes from SP to SLR
Daily/Weekly Date Programming_________________
Weekly [SUN’S~SAT’S]: You can record TV programs on the same channel at the same time every week.
Daily [MO ~ FR]: You can record TV programs on the same channel at the same time every day Monday
through Friday.
20