Avaya INDEX 4602 - Manual (Page 6)

Page 6 - IPNC Setup Installation Procedure
Dynamic Address Process
This is the recommended method to assign IP and telephony settings to the
4602 IP telephone.
DHCP Installation Preparation
This installation process uses the INDeX/INPC as a DHCP Server and H323
Gatekeeper to assign IP and telephony settings to the 4602 IP telephone. It also
assumes that the Manager application is used as the TFTP server during
installation. This is the simplest method of installation.
1. The INDeX /IPNC must be fitted with a Voice Compression Module (VCM).
a. Start the INDeX Monitor application. The initial lines of Monitor output
include the item VCOMP= which will state the number of VCM channels
installed in the INDeX/IPNC.
2. INDeX/IPNC Settings Using the Manager Application, open the
configuration and select the System form. Check the following:
a. System Name: In the System tab ensure that a Name for the
INDeX/IPNC has been entered.
b. TFTP Server IP Address: In the LAN1 tab, enter the IP address of the
Manager PC as the TFTP Server IP Address.
c. Gatekeeper Settings: In the Gatekeeper tab, ensure that Gatekeeper
Enabled and Auto-create Extn Enable are both selected.
d. If you have made any changes, upload the new configuration to the
INDeX/IPNC.
e. Within Manager, select File | Preferences and ensure that the address
is 255.255.255.255, otherwise TFTP will not work.
3. IP Phone Software The software for IP telephone installation is supplied on
the INDeX Administration CD. The files are copied into the Manager folder
during installation of the Manager application.
4. Manager and TFTPLog Leave Manager running. It is also useful to have
Manager's TFTP Log visible (select View | TFTPLog). This will display the
progress of file requests.
Page 6 - IPNC Setup INDeX 4602 IP Telephone Installation Manual
Installation Procedure 38DHB0002UKCQ – Issue 2 (11/06/2003)