Craftsman 315.235380 User Manual
Owner's manual 10 in. compound miter saw, Double insulated
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- Owner's Manual
- 10 in. COMPOUND MITER SAW
- TABLE OF CONTENTS
- WARRANTY
- INTRODUCTION
- RULES FOR SAFE OPERATION
- MEANING
- DOUBLE INSULATION
- READ ALL INSTRUCTIONS
- IMPORTANT
- KEEP CHILDREN AND VISITORS AWAY. All
- USE RECOMMENDED ACCESSORIES. The
- NEVER LEAVE TOOL RUNNING UNATTENDED. TURN THE POWER OFF. Do not
- USE ONLY CORRECT BLADES. Do not use
- KEEP HANDS AWAY FROM CUTTING AREA.
- INSPECT TOOL CORDS PERIODICALLY and if
- STAY ALERT AND EXERCISE CONTROL.
- MAKE SURE THE WORK AREA HAS AMPLE
- GLOSSARY OF TERMS FOR WOODWORKING
- PRODUCT SPECIFICATIONS
- UNPACKING
- ACCESSORIES
- Restore lower blade guard and securely tighten screw before use
- LOOSE PARTS LIST
- TOOLS NEEDED
- KNOW YOUR COMPOUND MITER SAW
- 15 AMP MOTOR
- 10 in. BLADE
- CUTTING CAPACITIES
- CARRYING HANDLE
- MITER LOCK HANDLE
- LOCK-OFF LEVER
- SPINDLE LOCK BUTTON
- TRIGGER LOCK
- POSITIVE STOPS ON MITER TABLE
- BEVEL LOCK KNOB
- ELECTRIC BRAKE
- FENCE
- SELF-RETRACTING LOWER BLADE GUARD
- MOUNTING HOLES
- ELECTRICAL CONNECTION
- MITER LOCK HANDLE
- DUST GUIDE
- TO INSTALL BLADE
- CUTTING A SLOT IN THE ZERO CLEARANCE THROAT PLATE
- SQUARING THE MITER TABLE TO THE FENCE
- SQUARING THE SAW BLADE TO THE FENCE
- SQUARING THE BLADE TO THE MITER TABLE
- PIVOT ADJUSTMENTS
- TRAVEL PIVOT ADJUSTMENT
- BEVEL PIVOT ADJUSTMENT
- DEPTH STOP
- DEPTH STOP ADJUSTMENTS
- APPLICATIONS
- CUTTING WITH YOUR COMPOUND MITER SAW
- CROSSCUTTING
- TO CROSSCUT WITH YOUR MITER SAW:
- BEVEL CUT
- TO BEVEL CUT WITH YOUR MITER SAW:
- COMPOUND MITER CUT
- TO MAKE A COMPOUND CUT WITH YOUR MITER SAW:
- SUPPORT LONG WORKPIECES
- CUTTING COMPOUND MITERS
- CUTTINQ CROWN MOLDING
- LAYING MOLDING FLAT ON THE MITER TABLE
- CUTTING WARPED MATERIAL
- CLAMPING WIDE WORKPIECES
- GENERAL
- LUBRICATION
- EXTENSION CORDS
- BRUSH REPLACEMENT
- PARTS LIST FOR FIGURE B
- PARTS LIST FOR FIGURE C