Craftsman 315.228110 User Manual
Owner's manual 10 in. table saw, Model no, Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Owner's Manual
10 in.
TABLE SAW
Model No.
315.228110
Save this manual for
future reference.
^ CAUTION:
Read and follow all
Safety Rules and Operating
Instructions before first use of this
product.
Customer Help Line: 1-800-932-3188
Sears. Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page:
972000-713
1-00
Safety
Features
Assembly
Operation
• Maintenance
• Parts List
($)
Advertising
Table of contents
Document Outline
- Owner's Manual
- 10 in.
- TABLE SAW
- MEANING
- SAFETY ALERT SYMBOL
- IMPORTANT
- READ ALL INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
- ELECTRICAL
- EXTENSION CORDS
- ELECTRICAL CONNECTION
- SPEED AND WIRING
- GROUNDING INSTRUCTIONS
- OPERATING COMPONENTS
- SPEED AND WIRING
- SAFETY DEVICES
- POWER SWITCH
- TO TURN YOUR SAW ON:
- TO TURN YOUR SAW OFF:
- TO LOCK YOUR SAW SWITCH:
- BLADES
- ASSEMBLING LEG STAND
- ASSEMBLING STORAGE BRACKETS
- MOUNTING THE LEG STAND ON THE TABLE
- SAW BASE
- B. ASSEMBLY OF RAILS, TABLES, AND FENCES
- TO INSTALL FRONT AND BACK RAILS
- TO INSTALL MITER TABLE AND FENCE
- TO INSTALL ACCESSORY TABLE AND RIP
- FENCE
- C. BLADE CHECK AND BLADE GUARD ASSEMBLY
- TO CHECK SAW BLADE INSTALLATION
- TO INSTALL BLADE GUARD
- A. GENERAL INFORMATION GROUNDING
- TYPES OF CUTS
- CUTTING TIPS
- TO CHECK, REPLACE OR ADJUST THE RIVING KNIFE AND BLADE GUARD ASSEMBLY
- TO REDUCE RISK OF KICKBACK
- TO MAKE A PUSH STICK
- FEATHERBOARD
- HOW TO MAKE A FEATHERBOARD
- HOW TO MOUNT A FEATHERBOARD
- TO ADJUST THE BLADE DEPTH
- TO ADJUST THE BLADE ANGLE
- TO SET THE SCALE TO THE BLADE
- TO LOCK MITER TABLE
- C. MAKING CUTS
- TO MAKE A STRAIGHT CROSS CUT
- TO MAKE A MITER CUT
- TO MAKE A STRAIGHT RIP CUT
- TO MAKE A BEVEL CROSS CUT
- TO MAKE A BEVEL RIP CUT
- TO MAKE A COMPOUND MITER CUT
- TO MAKE A LARGE PANEL CUT
- TO MAKE DADO CUTS
- A. GENERAL MAINTENANCE
- B. SPECIFIC TABLE SAW MAINTENANCE
- TO SET BLADE AT 0 OR 45 DEGREES
- TO CHECK THE ALIGNMENT OF THE RIP
- FENCE TO THE BLADE
- TO ADJUST THE BEVEL LOCKING LEVER
- TO ALIGN THE MITER LOCKING CLAMPS
- TO ADJUST THE FRONT AND REAR RAIL CLAMPS
- TO ADJUST THE ACCESSORY TABLE
- CHECKING SLIDING MITER TABLE ASSEMBLY
- TO CHECK MITER BASE PARALLELISM
- TO CHECK MITER FENCE ALIGNMENT
- TO ADJUST THE MITER FENCE
- TO ADJUST QUICK-STOP
- LOCKER BRACKET ASSEMBLY
- TILT / ELEVATING MECHANISM
- ELECTRICAL