Document Outline

• IMPORTANT MANUAL Do Not Throw Away
• Operator’s
• Manual
• CRflFTIMflr
  • 2.4 cu. in/40cc 2-CYCLE
  • 2.4 cu. in/40cc 2-CYCLE 2.6 cu. in/42cc 2-CYCLE GASOLINE CHAIN SAW
    • SAFETY RULES
      • WARNING:
      • KNOWYOUR SAW
      • PLAN AHEAD
      • FUEL HANDUNG
• A
  • LOOK FOR THIS SYMBOL TO po(Nx oUT IMPORTANT SAFETY PRECAUTIONS. IT MEANS - ATTENTIONiJ! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.
  • SAFETY RULES
    • OPERATE YOUR SAW SAFELY
    • MAINTAIN YOUR SAW IN GOOD WORKING ORDER
    • TRANSPORTING AND STORAGE
    • GUARD AGAINST KICKBACK - Kickback is a dangerous reaction that can lead to serious injury.
    • KICKBACK WARNING;
    • REDUCE THE CHANCE OF KICKBACK
    • MAINTAIN CONTROL
    • WARNING:
    • PRODUCT SPECrFICATlONS
    • MAINTENANCE AGREEMENT
    • CUSTOMER RESPONSIBILITIES
    • SPECIAL NOTICE
    • FULL ONE YEAR WARRANTY ON CRAFTSMAN GAS CHAIN SAW
  • CARTON CONTENTS
    • MODEL 358.351160 -16" MODEL 358.351180 -18"
    • TOOLS REQUIRED FOR SERVICE
    • TO REMOVE CHAIN SAW FROM CARTON
    • STOPPING YOUR ENGINE
    • CHAIN OILER {Fig. 7)
    • THROTTLE CONTROL GROUP (Fig. 8)
    • BEFORE STARTING ENGINE
      • FUEL STABIUZER
      • GUIDE BAR AND CHAIN OIL
      • GASOLINE
      • 40:1 2-CYCLE AIR-COOLED ENGINE OIL
      • GASOLINE AND OIL MIXTURE
      • FUEL MIXTURE CHART
  • OPERATÍON
    • STOPPING YOUR ENGINE
    • COLO ENGINE START AND WARM ENGINE START AFTER RUNNING OUT OF FUEL
    • STARTING A WARM ENGINE
    • DIFFICULT STARTING OR FLOODED ENGINE
  • OPERATION
    • GENERAL OPERATION TIPS
  • OPERATION SAFETY
    • WARNING:
    • AVOID REACTIVE PINCH FORCES
    • DETERMINE THE NATURAL FALL DIRECTION
    • CUTTING PROCEDURE (Fig. 12)
    • FELLING TIPS
• A
  • WARNING:
  • BUCKING
    • TYPES OF CUTTING (Fig. 13)
    • BUCKING ON THE GROUND (Fig. 14)
    • BUCKING USING A SUPPORT (Fig. 15 & 16)
    • BUCKING TIPS
  • OPERATiON SAFETY
    • BUCKING SAFETY
  • A
    • WARNING:
    • PRUNING AND UMBING
      • UMBING (Fig. 17)
      • PRUNING {Fig. 18)
      • PRUNING AND LIMBING TIPS
    • OPERATION SAFETY
      • PRUNING AND UMBING SAFETY
      • MAINTENANCE SCHEDULE
        • LUBRICATION CHART
      • BEFORE USE
        • CHECK FOR DAMAGED OR WORN PARTS
        • CHECK FOR LOOSE FASTENERS AND PARTS
        • CHAIN TENSION (Fig. 19 & 20}
        • SHARPENING CHAIN (Fig. 21,22,23,24,25,26 & 27)
        • WARNING:
        • GUIDE BAR MAINTENANCE (Fig. 28 & 29)
• [ui m lui nil
  • AFTER USE
    • CLEAN UNIT AND LABELS
  • EVERY 5 HOURS
    • CLEAN AIR FILTER (Fig. 30)
  • EVERY 25 HOURS
    • INSPECT MUFFLER AND
    • SPARK ARRESTOR SCREEN (IF INSTALLED)
    • (Fig. 31)
  • YEARLY
    • REPLACE SPARK PLUG (Fig. 32)
    • REPLACE FUEL FILTER (Fig. 33,34 & 35)
  • SERVICE AND ADJUSTMENTS
    • CHAIN REPLACEMENT (Rg, 36,37,38 & 39)
    • STARTER ROPE REPLACEMENT (Fig. 44,45,46,47 & 48)
    • CARBURETOR ADJUSTMENTS
      • WARNING:
      • CARBURETOR PRESETS (Fig, 49)
  • STORAGE
    • GAS CHAIN SAW STORAGE INSTRUCTIONS
    • FUEL SYSTEM
    • INTERNAL ENGINE
    • OTHER
  • TROUBLE SHOOTING POINTS
    • TROUBLE SHOOTING CHART
  • CRAFTSMAN
    • 2.4 cu. in/40cc 2-CYCLE
    • 2.4 cu. In/40cc 2-CYCLE 2.6 cu. in/42cc 2-CYCLE GASOLINE CHAIN SAW