Craftsman 358.351080 - Manual (Page 8)

OPERATION
KNOW YOUR CHAIN SAW (Fig. 6)
READ THIS OPERATOR’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the Illus­
trations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for
future reference.
Front
Hand Guard Handle
Starter
Rope Handle
On/Stop
Switch
. Primer
Rear
HarKJIe
TTirottle
Trigger
Choke
Knob
Bar Clamp
Figure 6
Listed by Underwriters Laboratories, Inc.
in accordance wiUi American National Standards for Gasoline-Powered Chain Saws Safety Requirements
___________________________________(ANSI B17S.1-1991).
The ON/STOP SWITCH is used to stop the engine.
The STARTER ROPE HANDLE Is used for starting the
engine.
The CHOKE KNOB activates the choke to provide addi­
tional fuel to the engine when starting a cold engine.
The THROTTLE LOCKOUT prevents the THROTTLE
TRIGGER from being squeezed accidentally.
The THROTTLE TRIGGER controls engine speed.
The GUIDE BAR is designed to carry the chain.
The CUTTERS are designed to cut the wood.
The BAR CLAMP NUTS are designed to hold the guide
bar after adjustments have been completed.
The ADJUSTING SCREW is designed to tension the chain
on the guide bar.
The PRIMER BULB circulates fuel to the carburetor.
8 -