Maintenance – Craftsman 315.113911 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MAINTENANCE

WARNING; When servicing,

use

only identical

Craftsman replacement parts. Use of any
other part may create a hazard or cause product
damage.

WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken or
destroy plastic.

Do not abuse power tools. Abusive practices can

damage tool as well as workpiece.

JUhl^

WARNING: Do not attempt to modify

this worklight or create accessories not

recommended for use with this worklight. Any
such alteration or modification is misuse and
could result in a hazardous condition leading to
possible serious personal injury.

BULB REPLACEMENT
See Figures 4 & 5.

When purchasing replacement buib, request recom­

mended part number 780115002. See Figure 5.

TO

REPLACE BULB:

■ Remove battery pack from worklight.

See Figure 2.

■ Depress button located on top of len cover then

pull lens cover to remove.

■ Remove old buib from spring by twisting bulb in a

clockwise direction.

■ Insert new buib in spring by twisting bulb in a

clockwise direction.

■ Replace lens cover aligning tabs inside lens cover

with slots on housing then snap into place.

■ Replace battery pack.

Note: For your convenience, your worklight has a bulb
storage area to store an extra bulb. See Figure 5.

DEPRESS

BUTTON

LENS COVER

PULL LENS

COVER FORWARD

TO REMOVE

BUTTON

BULB

STORAGE AREA

Fig. 4

Fig. 5

Advertising