Aintenance, Customer responsibtuttes, General recommendations – Craftsman 580.762200 User Manual

Page 11: Product specifications

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

AINTENANCE

CUSTOMER RESPONSIBtUTtES

MAINTENANCE SCHEDULE

FILL IN DATES AS YOU COMPLETE

HOURLY OPERATING INTERVAL

SERVICE DATES

RESULAR SERVICE

MAINTENANCE TASK

Before Each

Use

Every 25

Hours or

Yearly

Every 100

Hours or

Yearly

PRESSUREWASHER

Check/clean wafer inlet screen

on quick-connect.

xt

Check high pressure hose.

X

Check detergenf hose.

X

Check spray gun and assembly for leaks.

X

Purge pump of air and contaminants.

X

ENGINE

Check oil level.

X

Change engine oil.

X*

Service air cleaner.

X“

Clean/replace spark plug.

X

Prepare for storage.

Prepare unit for storage if it is to

remain idle for longer than 30 days.

t Clean if clogged. Replace if pertorated or tom.

* Chmge oil after first 2 hours then 26 thereafter. Change sooner when under dirty or dusty conditions.

** Clean more often under dirty or dusty conditions.

GENERAL RECOMMENDATIONS

The warranty of the high pressure washer does not cover
items that have been subjected to operator abuse or neg­
ligence. To receive full value from the warranty, operator

must maintain high pressure washer as instructed in fiis
manual.

Some adjustments will need to be made periodically to
properly maintain your high pressure washer.

All adjustments in the Service and Adjustments section of
this manual should be made at least once each season.

® Once a year you should clean or replace the spark

plug and dean or replace the air filter and check the

gun and wand assembly for wear. A new spark plug
and dean air filter assure proper fuel-air mixture and

help your engine run better and last longer.

PRODUCT SPECIFICATIONS

Pressure Washer Specifications

Engine Specifications

ENGINE MODEL

Craftsman

RATED HORSEPOWER

6.75

DISPLACEMENT

172CC

SPARK PLUG: Type;

Champion RN4C

or equivalent

Set Gao to:

0.030 inch (0.76mm)

GASOLINE CAPACITY

1.5 U.S. auart

OIL

SAE 30 weiaht

SOLID STATE IGNITION

AIR GAP

0.0125 inch

PRESSURE

2200

DSi

FLOW RATE

2.2 GPM

DETERGENT MIX

Use undiluted deteroent

WATER SUPPLY

TEMPERATURE

Not to Exceed 140°F

In the State of California a spark arrestor is required by
law (Section 4442 of the California Public Resources

Code). Other states may have similar laws. Federal laws
apply on federal lands.

Note: If you equip the engine of your pressure washer

with a spark arrestor muffler, the spark arrestor must be
maintained in effective working order by the owner/opera-
tor.

You can order a spark arrestor through your Sears

Service Center.

11

Advertising