Tools neede, Tools needed – Craftsman 315.284610 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FEATURES
BLADES
For maximum performance, it is recommended that you
use the 24-tooth, 10 in. carbide-tipped combination biade
provided with your saw. Additionai biade styies of the
same high quality are available for specific operations
such as ripping. Your local dealer can provide you with
complete information.
Kerf width must be within the limits stamped on the
spreader/riving knife.
A WARNING:
Do not use blades rated less than the
speed of this tool. Failure to heed this warning could
result in personal injury.
TOOLS NEEDE
J
The following tools (not included or drawn to scale) are needed for assembly and making adjustments:
'H'n'n’n'TTTpxTjTTTyrTTjTTTjTjTpTTpTTpTTyTjTyTTTjTTTjTi;
1 1 I I I 1 1
FRAMING SQUARE
PHILLIPS
SCREWDRIVER
COMBINATION
SQUARE
C-CLAMP
0
^^
FLATHEAD
SCREWDRIVER
Fig. 4
13