Operation, See figure 31, See figure 32 – Craftsman 315.284610 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
TO USE THE MITER GAUGE
See Figure 31.
The miter gauge provides greater accuracy in angied cuts.
For very cióse toierances, test cuts are recommended.
There are two miter gauge grooves, one on either side
of the biade. When making a 90° cross cut, you can use
either miter gauge groove. When making a beveied cross
cut (the biade tiited in reiation to the tabie) the miter gauge
shouid be iocated in the groove on the right so that the
biade is tiited away from the miter gauge and your hands.
The miter gauge can be turned 60° to the right or ieft.
■ Loosen the iock knob.
■ With the miter gauge in the miter gauge groove, rotate
the gauge untii the desired angie is reached on the
scaie.
Retighten the iock knob.
MITER
LOCK
KNOB
TO USE THE MITER GAUGE IN A REVERSE
POSITION
See Figure 32.
For iarger workpieces, the miter gauge can be reversed in
the miter gauge grooves. It wili be necessary when revers
ing the miter gauge to ciamp the workpiece to the miter
gauge body.
MITER GAUGE
Fig. 31
29