Craftsman 580.751781 - Manual (Page 10)

OPERATiON
HOW TO USE YOUR WASHER
IF YOU HAVE ANY PROBLEMS OPERATING YOUR
PRESSURE WASHER, PLEASE CALL THE PRESSURE
WASHER HELPLINE AT 1-800-222-3136.
STOPPING YOUR PRESSURE WASHER
» First, move engine RUN/STOP switch to "OFF" position
(Fig. 10).
A WARNING; NEVER ADJUST SPRAY PATTERN
WHEN SPRAYING. NEVER PUT HANDS IN FRONT
OF SPRAY NOZZLE TO ADJUST SPRAY PAT­
TERN.
NOZZLE IN HIGH
PRESSURE MODE
PUSH NOZZLE FORWARD FOR
LOW PRESSURE MODE AND DE­
TERGENT APPLICATION
FIG. 10
e Simply shutting OFF engine will not release pres­
sure In the system. Pull the trigger on the spray wand
assembly to relieve the pressure in the hose,
NOTE: A small amount of water will squirt out when you
release the pressure.
SPRAY NOZZLES
Your high pressure washer comes equipped with an adjust­
able nozzle (Fig. 11). You can order a turbo nozzle (Fig,
12). Attach either nozzle as shown in Fig. 11 and HAND
TIGHTEN the plastic knob.
HOWTO USE ADJUSTABLE NOZZLE
With the adjustable nozzle you can adjust the spray pattern
to be either high pressure or low pressure. You can also
adjust the spray so it is concentrated in a stream pattern or
expanded into a fan pattern. Use this nozzle to apply
detergent.
« Push the nozzle attachment forward when you wish to
adjust the spray to low pressure mode (Fig. 13). Push
the nozzle backwatxi to achieve high pressure.
o Twisting the nozzle adjusts the spray pattern from a
narrow stream to an expanded stream.
You can also adjust the pressure by turning the pressure
control knob (Fig. 14) to the desired pressure setting.
Turning this knob ail the way clockwise produces the high­
est pressure. Do not unscrew the pressure control valve
more than 3 turns. It will come off.
FIG. 14
TWIST NOZZLE TO
EXPAND SPRAY
TWIST NOZZLE TO NARROW
SPRAY STEAM
FIG. 13
10