Maintenance agreement, Customer responsibilities, Product specifications – Craftsman 580.751781 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CONGRATULATIONS on your purchase of a Sears Crafts­
man high pressure washer. It has been designed, engi­
neered and manufactured to give you the best possible

dependability and performance.

Should you experience any problem you cannot easily

remedy, please contact your nearest Sears Service Cen-

ter/Department or call the 1-800 number listed on the front
of this manual. We have competent, well-trained techni­
cians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will

enable you to assemble and maintain your high pressure
washer properly. Always obsen/e the “SAFETY RULES.”

MODEL

NUMBER

SERIAL

NUMBER

580.751781

DATE OF

PURCHASE

THE MODEL AND SERIAL NUMBERS WILL BE

FOUND ON A DECAL ATTACHED TO THE PRES­
SURE WASHER.

YOU SHOULD RECORD BOTH SERIAL NUMBER
AND DATE OF PURCHASE AND KEEP IN A SAFE

PLACE FOR FUTURE REFERENCE.

MAINTENANCE AGREEMENT

A Sears Maintenance Agreement is available on this prod­

uct. Contact your nearest Sears store for details.

CUSTOMER RESPONSIBILITIES

• Read and observe the safety rules.

® Follow regular schedule in maintaining, caring for and

using your high pressure washer.

PRODUCT SPECIFICATIONS

Pressure Washer Specifications

PUMP PRESSURE

Adjustable to 2500 psi

FLOW RATE

3gpm

DETERGENT MIX

Use undiluted detergent

DETERGENT RATIO

Adjustable to 73.1

WATER SUPPLY
TEMPERATURE

Not to exceed 140°F

SUCTION HEIGHT

3 FT. maximum

Engine Specifications

RATED HORSEPOWER

7.8

DISPLACEMENT

220cc

SPARKPLUG: Type:

Champion RC12yc

Set Gap To.

or equivalent
0.030 inch (0.76mm)

GASOLINE CAPACITY

4 U.S. gallons

OIL (20 oz. capacity)

SAE 30 weight

SOLID STATE IGNITION
AIR GAP

0.0125 inch

In the State of California a spark arrestor is required by law
(Section 4442 of the California Public Resources Code).

Other states may have similar laws. Federal laws apply on
federal lands.

NOTE: If you equip the engine of your pressure washer with

a spark arrestor muffler, the spark arrestor must be main­
tained in effective working order by the owner operator.

You can order a spark arrestor through your Sears Service
Center. See Repair Parts section of engine for part num­
bers.

Advertising