Craftsman 360.796900 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
then tighten the multi-function handle to blower
with the two screws (Fig. 3, H).
FIGURE 3
4.
Once the handle is secured, the blower tube with
;■ handle can be twisted and swiveled. Ensure that
the throttle cable does not become pinched or
trapped when swiveling handle.
5.
Install the extension tube (if desired) onto blower
tube by aligning the tab on the extension with the
corresponding area on blower tube; then push
together and twist to secure.
6.
Install the curved nozzle tube in the same manner.
Twist to secure.
OPERATION
KNOW YOUR BACKPACK AIR BLOWER
Read this Operator’s Manual and Safety Instmctions before operating your backpack air blower. Compare the
illustration below (Figure 4) with your backpack air blower to familiarize yourself with the location of various controls
and adjustments. Save this manual for future reference.
1. On-off switch
12. Anti-vibration springs
2. Throttle lever
13. Quick release carrying strap
3. Speed lever
14. Carrying strap
4. Primer
15. Carrying frame
5. Choke lever
16. Pleated tube
6. Air filter cover
17. Blower tube
7. Fuel tank cap
18. Extension tube
8. Starter rope handle
19. Curved nozzle tube
9. Sparkplug
20. Blower housing
10. Muffler
21. Clamp
11. Carburetor adjustment screws
22. Clamp with cable guide
FIGURE 4