Craftsman 320.28190 - Manual (Page 14)

PRODUCT SPECIFICATIONS
Rating
12.5 Amps
No load Speed
12000-25000RPM
Peak HP
2-1/4
Input
120-voits, 60HzAC
Collets/Nuts and Cutting Bit Shank Diameters
1/4 in. 1/2 in.
Fixed Base Diameter
6 inches
Sub Base Opening (Diameter for cutting bit use)
1-1/4 inches
Sub Base Thickness
0.23 inches (6mm)
Fixed Base Depth of Cut
1-3/4 inches (45mm)
NOTE: Before attempting to use your router, familiarize yourself with all of
the operating features and safety requirements.
Your fixed base router has a precision-built electric router motor and it should
only be connected to a 120-volt, 60-Hz AC ONLY power supply (normal house­
hold current). DO NOT operate on direct current (DC). This large voltage drop will
cause a loss of power and the router motor will overheat. If the router does not
operate when plugged into a correct 120-volt, 60-Hz AC ONLY outlet, check the
power supply. This router has alO-ft, 2-wire power cord (no adapter needed).
This Fixed Base Router has the following features:
1. 12.5 Amp, 2-1/4 Peak HP, Variable Speed Router Motor runs at 12,000 to
25,000 RPM (no-load speed).
2. Speed Dial allows matching proper speed to material and bit size.
3. Electronic Feedback Circuitry provides soft starts for longer motor life,
maintains constant speed under load for a quality finish in all materials.
4. Fixed Base featums Coarse and Fine Depth Adjustments for accurate set­
ups- Ideal for use with router table, sold separately,
5. Spindle Lock for easy 1 wrench bit changes. Includes 1/4 and 1/2 inch
Self-Releasing Collets/Nuts for use with a wide variety of 1/4 in. and 1/2 in.
router bits, sold separately.
6. Detachable power cord: a replaceable cord to prolong tool life and for easy
carrying and storage.
7. Ball bearings throughout the motor for smooth, efficient operation and long life.
8. Base features Ergonomically Designed Handles with soft grip for comfort,
maximum control with less vibration.
9. Base features Large Base Opening and Large Chip Shield, combined with 3
LED Work lights on Router Motor to provide high visibility of bit and work piece.
283SO ManuaLReviBed_070409 F^ge 14