Maintenance – Craftsman 580.762250 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MAINTENANCE

CUSTOMER RESPONSIBILITIES

MAINTENANCE SCHEDULE

FILL IN DATES AS YOU COMPLETE

REGLMJVR SERVICE

HOURLY OPERATING INTERVAL

MAINTENANCE TASK

Before Each

Use

Every 25
Hours or

Yearly

Every 50
Hours or

Yearly

Every 100

Hours or

Yearly

SERVICE DATES

PRESSURE WASHER

Check/dean water inlet screen

on quick-connect.

xt

Check high pressure hose.

X

Check detergent hose.

X

Check spray gun and assembly for leaks.

X

Purge pump of air and contaminants.

X

ENGINE

Check oil level.

X

Change engine oil. t

X*

Service air deaner.

X**

Clean/reptace spark plug.

X

Prepare for storage.

Prepare unit for storage if it is to remain idle for longer
than 30 days.

t Clean if clogged. Replace if periorated.

i .Change oil after first 8 hours of operation then after every 50 hours.

* Change sooner when operating under heavy load or high ambient temperature.

** Clean more often under dirty or dusty conditions.

GENERAL RECOMMENDATIONS

The warranty of the high pressure washer does not
cover items that have been subjected to operator
abuse or negligence. To receive full value from the
warranty, operator must maintain high pressure
washer as instructed in this manual.

Some adjustments will need to be made periodically
to properly maintain your high pressure'washer.

All adjustments in the Service and Adjustments sec­
tion of this manual should be made at least once

each season.

• Once a year you should clean or replace the

spark plug and clean or replace the air filter and

check the gun and wand assembly for wear. A
new spark plug and clean air filter assure proper
fuel-air mixture and help your engine run better
and last longer.

PRODUCT SPECIFICATIONS

Pressure Washer Specifications

PRESSURE

2250 Dsi

FLOW RATE

2.2 GPM

DETERGENT MIX

Use undiluted deteraent

WATER SUPPLY

TEMPERATURE

Net to Exceed 140°F

Engine Specifications

ENGINE MODEL

BricQS & Stratton

RATED HORSEPOWER

6.0

DISPLACEMENT

158cc

SPARK PLUG: Type:

Champion RJ-8C

or equivalent

Set Gao to:

0.030 inch (0.76mm)

GASOLINE CAPACITY

1 U.S. Quart *

OIL (20 oz. caDacitvf

SAE 30 weicht

SOLID STATE IGNITION

AIR GAP

0.0125 inch

Advertising