Checklist – Craftsman 580.762250 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cut tie wrap from high pressure hose. Connect
high pressure hose to gun with either two
adjustable wrenchs or one 11/16” and one 7/8”
wrench.
Place assembled spray gun on holder.
Remove plastic cap and connect high pressure
hose to pump.
CHECKLIST
Before you operate your new high pressure washer,
to be sure you receive the best performance and sat
isfaction from this quality product, please review the
following checklist:
•
All assembly instructions have been completed.
•
The high pressure hose connections to the spray
gun and to the pump are tight and secure.
CAUTION: Any attempt to crank or
start the engine before it has been
properly serviced with the recommend
ed oil may result in an engine failure.
See Page 9 for instructions on adding
oil and proper oil specifications.
While learning how to use your high pressure
washer, pay extra attention to the following important
items;
•
Engine oil is at proper level
•
Be sure gas tank is filled properly with clean, "
fresh, unleaded gasoline.
•
Become familiar with all controls - their location
and function. Operate those controls before start
ing the engine.