Striker replacement, Crrftsmrn – Craftsman 706.596690 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CRRFTSMRN
STRIKER REPLACEMENT
Tools Required:
Screwdriver
Removal
• Remove drawer from unit.
• Turn drawer upside down.
• Depress (2) detents. Push striker in to
remove.
Depress
detents
Installation
• Turn drawer right side up.
• Position striker in drawer.
• Push striker toward back of drawer
until striker snaps into place.
• Reinstall drawer.
Drawer installation and removal
• Empty the drawer.
• Fully extend the drawer.
Release
Lever Style
- Lift or
lower (depending on the
slide) the release lever
on both sides, {this
allows the slides to ride
over the stops.) Pull out
to remove.
Tab Style
- Depress the
release tabs on both
sides, {this allows the
slides to ride over the
stops.) Pull out to
remove.
To reinstall, carefully align the slides
and push the drawer into the unit until
the drawer stops.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA
FI 624