Maintenance and storage, Your responsibility, Awarning – Craftsman 247.885500 User Manual

Page 4: I a i, Danger, Adanger

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

hand in the discharge or collector openings. Use a
stick or wooden broom handie to unclog the
discharge opening.

Take ail possible precautions when leaving the unit

unattended. Disengage the collector/impeller, stop

the engine and remove the key.
When cleaning, repairing, or inspecting, make
certain coiiector/impeilerand aii moving parts have
stopped. Disconnect spark piug wire and keep away
from plug to prevent accidental starting.

Do not run the engine indoors, except when starting it

and/or transporting the snow thrower in or out of
building. Open doors before starting the engine in that
case. Exhaust fumes are dangerous.

Do not clear snow across the face of slopes. Exercise

extreme caution when changing direction on slopes.

Do not attempt to clear steep slopes.
Never operate the snow thrower without guards,

piates or other safety protection devices in place.

Never operate the snow thrower near glass

enclosure, automobiles, window wells, drop off, etc.,
without proper adjustments of snow thrower
discharge angle. Keep children and pets away.

Do not overload machine capacity by attempting to

clear snow at too fast a rate. Never operate the
machine at high transport speeds on slippery
surfaces. Look behind and use care when backing.

Never direct discharge at bystanders or allow anyone
in front of unit while throwing snow.
Disengage power to collector/impeller of the snow

thrower when transporting it or when the unit is not in use.

Use only attachments and accessories (such as

wheel weights, counter weights, cabs, etc.) approved

by the snow thrower manufacturer.

Never operate the snow thrower without good visibility

or light. Always be sure of your footing and keep a firm
hold on the handles. Walk, never run.

Muffler and engine become hot and can cause severe

burn injury. Do not touch the muffler or the engine
while starting or operating the snow thrower.

MAINTENANCE AND STORAGE

Check shear bolts, engine mounting bolts, etc., at

frequent intervals for proper tightness, thus ensuring
that the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present,

such as hot water heaters, space heaters, clothes
dryers and the like. Allow engine to cool before storing
in any enclosure.

Always refer to owner’s guide instructions for
important details if the snow thrower is to be stored for
an extended period.

Run machine a few minutes after throwing snow to

prevent freeze-up of the collector/impeller.

Check clutch controls periodically to verify that these
engage and disengage properly and readjust if
necessary. Refer to Service and Adjustments section
page 20 of this owner’s guide.

YOUR RESPONSIBILITY

Restrict the use of this power machine to persons who
read, understand and follow the warnings and
instructions in this manual and on the machine.

Following are representations of some of the safety labels on your Craftsman snowthrower. Please follow the
instruction on these labels and maintain safety while using or servicing the equipment.

AWARNING

1. STOP ENGINE BEFORE REMOVING

DEBRIS AND SERVICING UNIT.

2. KEEP CLEAR OF IMPELLER WHILE

ENGINE IS RUNNING

3. NEVER DIRECT DISCHARGE AT

BYSTANDERS OR WINDOWS OR

ALLOW ANYONE IN FRONT OF

UNIT

4. THOROUGHLY INSPECT THE AREA

THE EQUIPMENT IS TO BE

USED AND REMOVE ALL DOOR
MATS, SLEDS, BOARDS, WIRES AND
OTHER FOREIGN OBJECTS

5. REFER TO OWNERS MANUAL FOR

FULL INSTRUCTIONS

n7s<i

I

adanger

I

AVOID INJURY FROM

ROTATING AUGER -
KEEP HANDS, FEET

AND CLOTHING AWAY.

I A I

[ ' I

danger

I

SHUTOFF ENGINE

BEFORE UNCLOG­

GING DISCHARGE
CHUTE.

Advertising