Ready-light/accessory shoe – Nikon N80 User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ready-Light/Accessory Shoe
Multi-Sensor Balanced Fill-Flash
Multi-Sensor Balanced Fill-Flash, without the Distance Information added to
the 3D Multi-Sensor Balanced Fill-Flash, can be performed with a combination
of the N80/N80QD camera and CPU Nikkor lens other than D/G-type.
• Set the camera’s exposure mode to any mode other than Manual and
metering system to other than Spot when using built-in Speedlight.
^3D Multi-Sensor Balanced Fill-Flash together with Multi-Sensor Balanced Fill- ^
(.Flash is called Automatic Balanced Fill-Flash with TTL Multi Sensor
^
Standard TTL Flash
Standard TTL Flash can be performed with non-CPU Nikkor lens. (Can only be
used with exposure mode set to Manual) With CPU Nikkor lens. Standard TTL
Flash is automatically set when the camera is set to Manual exposure mode or
Spot metering when using the built-in Speedlight. In Standard TTL Flash,
automatic flash output level compensation is not available. This means that,
even though the main subject is correctly exposed, the background may not
be. Standard TTL Flash is useful when you want to highlight the main subject
or perform flash exposure compensation.
• Monitor Pre-Flash is canceled in Standard TTL Flash.
I Ready-light
I II (D
• When using the built-in Speedlight or an optional Speedlight such as the SB-80DX,
SB-50DX, SB-30, SB-29S/29, SB-28/28DX, SB-27, SB-23 or SB-22s, the
ready-light 4 appears in the viewfinder when the Speedlight is fully charged and
ready to fire.
• If the ready-light blinks approx. 3 sec. after full flash output, underexposure
may have occurred (when the Speedlight is set to TTL or non-TTL auto flash
mode). Check the focus distance, aperture or flash shooting distance range
and shoot again.
I Accessory shoe
«An optional Speedlight, i.e. SB-80DX, SB-50DX, SB-30, SB-29s/29, SB-28/28DX,
SB-27, SB-23 or SB-22s can be attached directly to the accessory shoe of the
N80/N80QD without a cord. This accessory shoe is equipped with a safetylock
which prevents accidental drop when a Speedlight with a safety-lock pin (i.e.
SB-80DX, SB-30, SB-28/ 28DX, SB-27, SB-26, SB-25 or SB-22s) is attached.
79
■S’ '■
5