Q set the sb-20’s flash mode selector to ttl – Nikon SB 20 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Programmed TTL Auto Flash Shooting (with Nikon F-501/N2020, F-401/N4004 or

F-301/N2000)

------ ' '

.........

Steps 9 through 11 provide instructions for program­

med TTL auto flash shooting with the Nikon F-501/

N2020*, F-401/N4004** or F-301/N2000* camera.-

For other flash exposure operations (TTL auto, non-TTL

auto and manual flash exposure operations) see “SET­

TING CAMERA SHUTTER SPEED” on page 17 and

"DETERMINING APERTURE," pages 18 to 32.

*

The Nikon N2020 and N2000 are sold exclusively in the

U.SA. and Canadian markets.

’"'The Nikon N4004 is sold exclusively in the U.S.A. market.

For programmed TTL automatic flash opera­

tion, note the following:

• Use Al-S type lenses only. With Nikon F-401/

N4004, use only AF-Nikkor lenses, except

AF-Nikkor 80mm f/2.8, 200mm f/3.5 IF-ED
and Autofocus Converter TC-16/TC-16A.

• For autofocus operation, set the Nikon

F-501/N2020’s focus mode selector to S for

Single Servo Autofocus mode, or set the

Nikon F-401 /N4004 to A for autofocus mode.

For details, see pages 14 to 16.

Q Set the SB-20’s flash mode selector to

TTL.

For the flash shooting range in programmed TTL auto­

matic operation, see table on page 21.

The shooting distance range panel at the back of the

SB-20 also helps you to see the flash shooting range.

To read a proper distance range, set the film speed

knob and distance scale selector (see page 19.) A pat­

terned bar among the flash shooting distance range

indicators shows the shooting distance range in pro­

grammed TTL auto operation.

10

Advertising