Nikon SB 20 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bounce Flash Photography Procedure
1. Select a ceiling to bounce the flash from. In color
photography, selecf a white or silver ceiling—other
wise, color photographs come out with an unnatural
color cast similar to that of the reflecting surface.
2. Rotate the flash head upwards, towards the ceiling.
To avoid uneven illumination, rotate flash head back
60° or more.
3. Set flash mode selector to TTL for TTL auto flash
operation-or A for non-TTL auto flash operation, then
turn on the flash unit. The bounce indicator lights up.
4. Choose an aperture and perform a test firing. If the
ready-light blinks after test firing, indicating under
exposure may occur at the aperture set on the lens,
use a wider aperture or reduce the bounce distance
and test fire the flash again.
40