Nikon EL2 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
until it clicks and locks into place. These steps provide
for full mounting of the lens, while simultaneously
indexing the lens’ maximum aperture setting to the
camera’s metering circuit.
To mount a lens not fitted with a meter coupling ridge,
first lock the meter coupling lever in the up position
(again, see “Coupling Lever Lock/Release Operation”
for details). Then mount the lens and lock it into posi
tion as explained previously. For operation with lenses
not fitted with a meter coupling ridge, stop-down mea
surement (as described on page 32) is required.
Advertising