Checking battery power – Nikon N6000 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CHECKING BATTERY POWER

Slide power switch to ON and confirm
indications on LCD panel.

/“'

m

Fu

--------------

N

i ZiC

[>}] fU

s

f

S.5

(

E )

--------------

V

After approx.

16 sec.

r

A

[33V

0

1

E ]

With sufficient battery power, shutter speed and aperture indicators remain on for

approx. 16 sec., unless you release shutter.

If indicators turn off immediately, replace battery.

• Even with sufficient battery power, shutter speed and aperture indicators go off

approx. 2 sec. after you remove your finger from button, following shutter release.

• Lightly pressing the shutter release button, after exposure meter automatically

turns off, turns exposure meter on again. With sufficient battery power, meter stays
on for approx. 16 sec. after you remove your finger from the shutter release button.

• When not using the camera, be sure to turn power switch

off, to conserve battery power.

• The battery operates camera motor. When film-advance

speed becomes noticeably slower, replace battery with
fresh one.

• If all indicators on LCD panei blink when you lightly press

shutter release button, battery should be replaced.

• If shutter does not operate and data does not appear on

the LCD panel or viewfinder, the battery pack is exhaust­
ed or improperly loaded.

12

Advertising