Setting power switch, Stby (standby) position – Nikon Autofocus Speedlight SB-22 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SETTING POWER SWITCH
STBY (STANDBY) Position
Use to conserve energy and shorten recycling time.
With Nikon F-501/N2020, F-401/N4004, F-301/
N2000, FA, FE2and FG:
Use the SB-22’s STBY position to turn on the SB-22.
In STBY position, when the camera’s meter turns off, in
one or two minutes the SB-22 turns off automatically.
To turn the SB-22 on again, lightly press the camera’s
shutter release button.
Note: When the Nikon FA or FE2 is connected to Nikon
Motor Drive MD-12 via a remote cord, the camera‘s meter
stays on and the SB-22 remains on at STBY position.
Advertising