Using wide-flash adapter – Nikon Autofocus Speedlight SB-22 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING WIDE-FLASH ADAPTER
The angle of illumination of the
SB-22 covers the picture angle of
a 35 mm lens. When the wide-flash
adapter stored in the flash head is
set, it increases the angle of cover
age, allowing the SB-22 to be used
with a 28 mm lens. When the wide-
flash adapter is used, the guide
number is reduced to 18 (ISO 100
and meters) or 9 (ISO 25 and
meters), and the shooting distance
range for automatic operation
changes. With the sliding move
ment of the wide-flash adapter, the
distance scale changes accord
ingly.
Tilt the flash head to the 90° po
sition. Slide out the wide-flash
adapter to cover the flash head.
Turn the flash head to its original
position.
Tilt the flash head to the 90° po
sition. Then, while pushing the
wide-flash adapter lock button,
slide the wide-flash adapter into
the pocket. Turn the flash head to
its original position.
36