Nikon Autofocus Speedlight SB-22 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1. Set the camera shutter speed manually to a flash
synchronization speed or slower speed.
2. Frame the background in the camera viewfinder,
turn on the camera’s exposure meter to determine
aperture for a correct background exposure, then
set the aperture on the lens.
3. Set the flash mode selector to TTL, turn on the
SB-22 and take the shot.
With a strongly backlit subject (e.g., scene which in
cludes the sun), it may be difficult to obtain desired
exposure balance. In this case, use the SB-22 in M
mode.
Note: Do not use programmed TTL flash operation for fill-in
flash photography.
In TTL Mode
38
Advertising