Bounce flash photography procedure – Nikon Autofocus Speedlight SB-22 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
60° or more
Bounce Flash Photography Procedure
1. Select a ceiling to bounce the flash from. In color
photography, select a white or silver ceiling—other
wise, color photographs come out with an unnatural
color cast similar to that of the reflecting surface.
2. Tilt the flash head upwards, towards the ceiling.
To avoid uneven illumination, tilt flash head back
60° or more.
3. Set flash mode selector to TTL for TTL auto flash
operafion, At or A2 for non-TTL aufo flash oper-
afion, then turn on the flash unif. The bounce indi
cator blinks.
Advertising