Turn on the flash ' unit – Nikon SPEEDLIGHT SB-16 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
C-15.
Set lens to the
' minimum aperture
(largest f-number).
Q_'|0 Set the SB-16’s
' mode selector
to TTL.
For automatic
operation (A2)
17.
Turn on the flash
' unit.
Slide the SB-16’s ON/OFF switch to
the right. Immediately, an LED will light
up (green LED for TTL operation, or
red At or A2 LED for automatic
operation).
Note:
The LED may blink for a short while after
the flash unit is turned on. This does not indicate
a malfunction.
17
Advertising
This manual is related to the following products: