Running lock, Remote control shooting – Canon 312 XL-S User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Running Lock
The running lock locks the shutter release lever for
continuous shooting. Press the shutter release lever
and then rotate the main switch to the left all the
way to “RL". When you remove your finger from
the shutter release lever, the camera will continue to
run. To release the running lock, return the main
switch from the "RL" position. This running lock is
used for remote control shooting with the Remote
Switch 60 or with the microphone switch.
*Please put the finder cover on before filming by
remote control so that light does not enter through
the eyepiece and affect the film.
Remote Control Shooting
When the remote control switch is used:
1. Set the main switch and remote switch to "OFF",
and insert the remote switch plug into the remote
control jack on the camera.
2. Set the main switch to "RL", pressing the
shutter release lever all the way.
3. Press the remote switch button to begin advanc
ing the film. Slide the button in the direction of the
arrow for running lock, which will provide continu