Erasing images (all image erase), Set the camera to play. (^102), Press the < m > button – Canon EOS D30 User Manual
Page 108
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erasing Images (All Image Erase)
You can erase images one image at a time, or you can erase all images on the CF card at once.
This section describes how to erase all the images recorded on a CF card in one operation. To
erase images one at a time, see “Erasing a Recorded Image (Single Image Erase)”. (->-47)
Set the camera to PLAY. (^
102
)
Press the (E) button.
, The latest picture taken will be displayed.
Press the < m > button.
The Erase menu appears.
Turn the (0> dial to select [All...],
then press the <0> button.
The Erase Confirmation message appears.
Turn the (0> dial to select [OK],
then press the (©> button.
. The camera erases all unprotected
images.
II
Once an image is protected, it cannot be removed by the camera’s Erase function.
To erase a protected image, you must first remove the protection.(->107).
Once an image is erased, it cannot be recovered. Make sure you no longer need
the image before erasing it.
If you protect the images you need (->107) and erase all the images at once, all
non-protected images will be erased. This is handy when you want to erase all the
images you do not need at once.
108