From the menu, select [c.fn, Press the <@> button, Select [c.fn-13 – Canon EOS D30 User Manual

Page 117: J cleaning the cmos imaging element, The (o) dial to select

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

j Cleaning the CMOS Imaging Element

The imaging element corresponds to the film in a film camera. If dirt or foreign matter gets on

this imaging element, black spots may be recorded on the corresponding part of the image. If

this happens, use the procedure below to clean the imaging element.

Because the imaging element is very sensitive, we strongly recommend that you have the

cleaning done by Canon service representatives.

When cleaning the imaging element, always connect the EOS D30 camera to a household

power outlet using the DC coupler. If you try to clean the imaging element while the battery pack

is installed in the camera, the cleaning warning message “ FjC” will blink on the LCD panel and

you will not be able to clean the imaging element.

Before you start cleaning, remove the lens (^30), attach the DC coupler (^29), and set the

Main Switch to (ON>.

Insert the DC coupler (-^29) and set

the Main Switch to <ON>. H31)

....... .1

From the menu, select [C.Fn].

Press the (MENU) button.

Turn the (O) dial to select [C.Fn],

Press the <@> button.

The

Custom

Function

Setting

screen

appears.

Select [C.Fn-13],

# Turn

the (O) dial to select

C.Fn-13

[Sensor

cleaning],

then press

the

(0)

button.

5

2
Q>

><.

CQ

0)

Z3
Q.

m

0)

w

d

'

CQ

73

0

o

o

—i

Q.
CD
Q.

3

0)

CQ

CD
Crt

117

Advertising