Canon 188A User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Viewfinder Information on Manual Flash
1. F-1
The aperture needle points to the aper
ture set on the lens.
4. AE-1
The only information will be the flashing
"M*’ signal to indicate manual aperture
control. The meter needle will swing to
its upper limit.
2. A-1
Shutter speed of 1/60 sec. (or "bu"
when set to “B"), the “F" flash signal,
and "M" for manual aperture control
will be displayed. There is no aperture
display.
5. AL-1 and AV-1
The meter needle will swing to the
shutter speed of 1 /60 sec. (unless
selector dial is on “B").
3. AE-1 PROGRAM
The " [J)" niark indicating the flash is
charged and "M" for manual aperture
control will be displayed There is no
aperture display.
25