Q auxiliary input, Q tv filming – Canon 514XL-S User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q Auxiliary Input
^ When the sound is to be recorded directly from
record,tape recorder,TV,or other sound systems, set
the Audio Level Dial of the camera to "AUX'' The
Connecting Cord C300L is used to connect the
auxiliary input to the recording jack (REC), line out
or earphone jack of the sound system. The volume
level is controlled by an ALC circuit. Switch on the
sound source first, and then please make sure to
check the recording level with the earphone by
pressing the shutter release lever at the first step. If
the sound is too low or distorted, adjust the audio
controls for the proper setting. (Please refer to the
instruction of the sound system.)
*
If the Tone Select Switch is set at "CLEAR",
it has no effect at the AUX input.
*
If another cord is used, recording may not take
place. You can confirm recording by the
earphone.
Q TV Filming
* This camera can also film image from TV
effectively. Set to 18 fps, and with Type A film set
to"-l5-"as in daylight shooting. This film will
have a blue tone so either adjust the T.V.'s picture
tube to a reddish tone or use a CCA filter. Be
careful to avoid other sources of light or window
reflections.